"Trust me, when it comes to com gear -
there is no other for quality gear and customer service...."
Special
Assignments Unit Member
Phoenix (AZ) Police Department
- Many TCI products are available through GSA & GSA Advantage! Contact TCI for further information or a quotation.
- PRODUCTS: ALL TACTICAL HEADSETS | LIBERATOR II | LIBERATOR III | TTMK III | TASC I | PATROL II | SAS II & SAS | TABC II
- SOBC II | TECS | COBRA RA-3185 | TACK-1 | TACK-2 | CUSTOM PRODUCTS | PTT & CABLE OPTIONS | PRR ADAPTER | HOME
ABOUT TCI:
Thank
you for your interest in our tactical headset line and more importantly,
Thank you for your Service! Its no secret
that public safety and military
tactical elements have man
y challenges today. A high
priority has been placed on global defense and national security, but the
fact remains that local bad guys are still local bad guys and teams have
to handle these missions as effectively as our anti-terrorism units. Increasing demands require better
training and the best headset communication products. Failure is not
an option... As we evolve, continue to develop an array of tactical headset solutions
to meet the demands of today's war fighter tactical operator. We
probably offers the widest array of tactical
communication product in the industry. We can even create a custom
solution for you through our "Custom Works Division".
When you are enforcing laws, protecting a community or a nation, you need headset products you can depend on. We are a well-established company with a strong reputation in progressive headset design, performance and technologies. Our products perform well and provide the reliability, durability and value you deserve. We believe there can be no compromise in quality, since your personal safety and the success of your mission depends upon the equipment you use. We know that in the heat, in the cold, and when bullets are flying, you deserve only the best products available... This is why TCI create new and exciting communication solutions every day.
TCI offer products mutually compatible with the public safety and military radios used today. Independent product certifications indicate the quality of our products is evidenced by approvals by thousands of customers around the globe and top-quality radio manufacturers. We take quality standards very seriously and this will be readily apparent when you use our products!
-
Don Medine
President & Founder
Service Disabled - Tactical Officer/Team Leader, K9 Officer,
- Narcotic Officer, Special Agent & Police Sergeant
COMPATIBILITY
CHART:
LIBERATOR II TACTICAL HEADSET CONFIGURATIONS
- All
headsets within the Liberator™ Headset Series feature low-profile
ear cups, superior communication integration and innovative hearing
protection and Talk-Thru performance! Various configurations are
offered...
Our Liberator II™ Tactical Headset, was designed to military durability
standards for USAF SOF TACP - Special Operations Forces (Tactical Air
Control Party), Special Forces and USAF JTAC's and offers MSA Sordin
hearing protection. This enables the Liberator II™ to be worn
comfortably under MICH, PASGT and other ballistic helmets. It is
suitable for practically any tactical team because TCI can interface the
Liberator II™ with practically any portable radio model. Military
Liberator II™ models even interface with military aviation (ICS) (this
version requires an optional NATO adapter for MIL Aviation ICS) and
military field radios (SINCGARS, ASIP, PRC’s and MBITR). Dual-Comm and
Single-Comm versions are available. The Liberator II™ Headset provides
electronic hearing protection (NNR 22/Attenuation up to 29 dBa) and
ambient sound amplification. We have integrated a flexible boom
microphone with an effective noise-canceling Dynamic or Electret
microphone. We also include our TCI Tactical Push-To-Talk, or U-94 Switch
Box and radio interfaces for your radio
model(s). The Liberator II™ Soldier System Headset is available with
interfaces for a wide array of law enforcement tactical radios and
hundreds of other radio models.
AN/VIC-3, LV2, ROVIS COMPATIBLE HEADSET PACKAGES
AVAILABLE!
- Ideal for mounted and dismoun
PRODUCT ID:
DUAL-CHANNEL SELECTABLE DUAL-COMM Liberator II™ HEADSET | Compliance:
MIL-STD 810C, D, E | COMPATIBILITY: MOST RADIO MAKES/MODELS AND
AN/VIC-3
PRODUCT ID: TABC II HEADSET | Durability Standards: MIL-STD 810C, D, E >> COMPATIBILITY: MOST RADIO MODELS
PRODUCT ID: TTMK III HEADSET | Durability Standards: MIL-STD 810C, D, E >> COMPATIBILITY: MOST RADIO MODELS
PRODUCT ID: TACK-2 HEADSET | Durability Standards: MIL-STD 810C, D, E >> COMPATIBILITY: MOST RADIO MODELS
LIMITED INVENTORY REMAINING
COMPATIBILITY CHART:
RA-3185/Cobra and Cobra Plus
have been
added to TCI's portfolio of light patrol and public safety tactical
headsets. The Cobra tactical headset offers a single strap
suspension system, while the Cobra Plus upgrade includes an adjustable three-point
suspension kit for enhanced stability as well as vented or medium
attenuation inserts (shown right). The Cobra tactical headset
series offers a low-profile footprint that allows it to fix well under a
variety of tactical helmets. The cobra Plus upgrade provides
stability improvements over the standard Cobra headset. These
exceptional headsets comes with our TCI Tactical PTT and a radio
interfaced matched to your radio specifications.
Also available for AN/VIC-3 Vehicle Intercom Systems! Contact a TCI
Sales Representative for further information!
AN/VIC-3, LV2, ROVIS COMPATIBLE HEADSET PACKAGES AVAILABLE!
PRODUCT ID: COBRA / COBRA PLUS HEADSET | Durability Standards: MIL-STD 810C, D, E >> COMPATIBILITY: MOST RADIO MAKES/MODELS AND AN/VIC-3
PRODUCT ID: TASC-1 HEADSET | Durability Standards: MIL-STD 810C, D, E >> COMPATIBILITY: MOST RADIO MAKES/MODELS AND AN/VIC-3
PRODUCT ID: PATROL II HEADSET | Durability Standards: MIL-STD 810C, D, E >> COMPATIBILITY: MOST RADIO MODELS
SPECIAL AIR SERVICE II HEADSET (SAS II) -
Tactical Microphone and Earpiece Package -
Offering all of the great features, durability and performance of the
original SAS Headset, but now offered with a high-performance,
tactical-black Ear-Coil.Currently offered as the same price as the original SAS Headset! Call us for more information!
PRODUCT ID: SAS II HEADSET | Durability Standards: MIL-STD 810C, D, E >> COMPATIBILITY: MOST RADIO MODELS
PRODUCT ID: SAS HEADSET | Durability Standards: MIL-STD 810C, D, E >> COMPATIBILITY: MOST RADIO MODELS
PRODUCT ID: SOBC II HEADSET | Durability Standards: MIL-STD 810C, D, E >> COMPATIBILITY: MOST RADIO MODELS
COMMUNICATIONS
KIT [Option I Version] (TACK) - The TACK - 1 Headset is a progressive, head-worn communication headset
for various applications. Its design allows it to be worn in
conjunction with most tactical helmets, bicycle helmets, hats and hoods.
The noise-canceling/waterproof microphone provides exceptional transmit
audio (with or without a gas mask). The TACK-1 version
(shown
to the left during a gas mask deployment) includes a pivoting speaker. A Gas Mask is
not required,
but is shown to demonstrate compatibility. Please refer to our
PUSH-TO-TALK Options for additional information. This is an
exceptional tactical, command post or bicycle patrol product and is
offered with our TCI Tactical PTT.
PRODUCT ID: TACK-1 HEADSET | Durability Standards: MIL-STD 810C, D, E >> COMPATIBILITY: MOST RADIO MODELS
PRODUCT ID: TECS HEADSET | Durability Standards: MIL-STD 810C, D, E >> COMPATIBILITY: MOST RADIO MODELS
TCI TACTICAL PUSH-TO-TALK (PTT)EXCLUSIVE TCI TACTICAL PUSH-TO-TALK: The TCI Tactical PTT is a silent, terrifically designed and durable Push-To-Talk switch for various communication applications. Customers have stated it is possibly the best tactical PTT in the industry... The TCI Tactical PTT is heat, chemical and water resistant. A heavy duty, omni directional clothing clip and optional remote PTT connection are included with all PTT's. The remote PTT connection includes an integrated environmental seal for use when not taking advantage of one of remote PTT options (below). Dimensions: 2 in. Diameter x 1 in. High.... the perfect size for tactical applications. The TCI Tactical PTT has a protective ring and recessed activation surface to curtail inadvertent PTT keying, yet it is easily activated even when wearing Nomex® or other types of tactical gloves!! Please note that we will need your headset type, headset electronic specifications, headset connection type, and your radio makes and models to provide an accurate quotation. Customers may send us their headset(s) for us to verify specification information or add a compatible connection for the TCI Tactical PTT.
PRODUCT ID: TCI TACTICAL PTT | Durability Standards: MIL-STD 810C, D, E >> COMPATIBILITY: MOST RADIO MODELS
The TCI PTT was designed to provide dual-comm capability for conventional dual downlead headsets by TCI, Peltor and MSA Sordin. The PTT provides (2) two headset connections that integrate with one PTT housing (instead of two separate PTT's). This PTT provides RF and cross-talk protection of secure and non-secure voice communications. Two color-coded buttons allow the operator to easily key the corresponding radio with one finger. Custom cable lengths available upon request. Click MORE INFORMATION to learn more about this system.
Please note that this is an excellent and purpose-built PTT solution for dual-downlead tactical headsets. It is not intended to convert single-downlead headsets into a dual-comm solution. Contact TCI for custom configurations or if you are using a radio not listed.
PRODUCT ID: TCI U-SERIES DUAL-COMM PTT | Durability Standards: MIL-STD 810C, D, E >> COMPATIBILITY: MOST RADIO MODELS
[QUOTATION
REQUEST]
TCI SELECTABLE DUAL-COMM TACTICAL PTTThe TCI Selectable Dual-Comm Tactical PTT is a silent, exceptionally designed and durable Push-To-Talk switch used with one headset and two radios simultaneously. The Selectable Dual-Comm PTT allows an operator to monitor and transmit one of their two radios at a time, while having the capability to change the toggle switch to monitor and transmit the second radio. Designed to fill the operational void between Single-Comm and Dual-Comm Headsets and for those operators that carry two radios, but do not need the capability of transmitting on or receiving from both radios simultaneously. It is and exceptional option for operators who primarily use one radio at a time. We also offer conventional Dual-Comm Headsets that feature dual Tactical PTT's for operators needing more traditional dual-comm capabilities.
The TCI Tactical PTT is heat, chemical and water resistant. A heavy duty, omni directional clothing clip and optional remote PTT connection are included with all PTT's. The remote PTT connection includes an integrated environmental seal for use when not taking advantage of one of remote PTT options (below). Dimensions: 2 in. Diameter x 1 in. High.... the perfect size for tactical applications. The TCI Tactical PTT has a protective ring and recessed activation surface to curtail inadvertent PTT keying, yet it is easily activated even when wearing Nomex® or other types of tactical gloves!! Available with or without a headset. Please note that we will need your headset type, headset electronic specifications, headset connection type, and your radio makes and models to provide an accurate quotation. Customers may send us their headset(s) for us to verify specification information or add a compatible connection for a TCI Selectable Dual-Comm Tactical PTT.
PRODUCT ID: TCI SELECTABLE DUAL-COMM PTT | Durability Standards: MIL-STD 810C, D, E >> COMPATIBILITY: MOST RADIO MODELS
TCI TACTICAL
AN/VIC-3, LV2, ROVIS ICS/VEHICLE
INTERCOM SYSTEM
PUSH-TO-TALK (shown with optional volume control)The TCI Tactical ICS/Vehicle Intercom System PTT was designed to integrate primarily designed for VIC systems to enable either "Hot Microphone" or ICS Push-To-Talk Functionality. The ICS PTT includes a toggle switch so the PTT modes can be changed from "Hot Microphone" or ICS Push-To-Talk on the fly, according to combat demands. There is also an optional volume control (shown in photo).
OPTIONS:
1) U-329, TP-120, AP-107 or AJ-107
ICS connections
2) Optional Headset Volume Control
3) Single Headset Connection (shown in photo) or Dual Headset Connections: Dual connections allow a Dual-Comm Liberator Series Headsets to be connected to one ICS PTT for binaural audio reception.
PRODUCT ID: TCI.PTT/ICS | Durability Standards: MIL-STD 810C, D, E >> COMPATIBILITY: MOST VIC & MIL AVIATION INTERCOM SYSTEMS (ICS)
ALTERNATIVE U-94 A/U
PUSH-TO-TALK (PTT)The U-94 A/U is a popular PTT assembly used throughout the military and law enforcement. It is ideal for vehicle and aviation ICS applications since it has a very positive, tactile feel when activated. TCI can provide the U-94 A/U PTT assembly upon request. Contact TCI directly if you are interested in the U-94 A/U PTT for your headset. Available with or without a headset. Please note that we will need your headset type, headset electronic specifications, headset connection type, and your radio make and model to provide an accurate quotation. Customers may send us their headset(s) for us to verify specification information or add a compatible connection for U-94 PTT.
PRODUCT ID: TCI U-94 PTT | Durability Standards: MIL-STD 810C, D, E >> COMPATIBILITY: MOST RADIOS, VIC and AVIATION INTERCOM SYSTEMS (ICS)
MILITARY "Y" CABLE (RADIO
INTERFACE SPLITTER)TCI's Military "Y" Cable enables an operator to connect two headsets or one headset and one Military Handset (H-250, etc.) to one radio. Simultaneous transmissions are possible, but not recommended due to radio usage disciplines. Nonetheless, both devices connected to the "Y" splitter simultaneously receive transmissions. The use of the "Y" splitter is popular when a Comms Operator occasionally shares their radio with a team leader or Commander. Please note that the Military "Y" Cable is available with four and five conductor wiring. The radio connection is a U-329 and the two device connection are U-328.
PRODUCT ID: TCI 329Y/2.328 | Durability Standards: MIL-STD 810C, D, E >> COMPATIBILITY: MOST PRC RADIOS, and VIC Systems
TACTICAL PUSH-TO-TALK (PTT)
EXTENSION CABLEDue to the vast array of communication requirements possible, we gladly manufacture various custom cable assemblies that augment the functionality of our systems and enable us to literally provide "custom" solutions quickly and upon demand. The photo on the left, shows one of the PTT extension cables available. In essence, this cable allows a conventional U-329 terminated Tactical PTT cable to be extended to a length of four to twelve feet. This is ideal for certain VIC, ASIP and SINCGARS requirements. We also create an array of headset extension cables, MP3 (IPOD/PDA) Liberator Integration cables to facilitate online ordering while you are deployed... We offer so many options that it has been most efficient to receive your requirement by telephone or email to ensure you get exactly what you need!
Durability Standards: MIL-STD 810C, D, E >> COMPATIBILITY: MILITARY PRC's, VIC & AVIATION ICS
Compliance: MIL-STD 310C | COMPATIBILITY: TCI TACTICAL PTT
Compliance: MIL-STD 310C | COMPATIBILITY: ANY TCI TACTICAL PTT
Our
technical staff is able to interface our tactical headset solutions with
virtually any law enforcement, military/government
radio model, Military Aviation Intercom and Military Vehicle Intercoms. This includes the
PRR/H4855/Bowman/PRC-343, MBITR,
PRC-148-Urban, PRC117, PRC-150, PRC-152, 5800-HH, PRC-119, PSC-5, ASIP,
PRR, SINCGARS, VIC-2, VIC-3, LV2, ROVIS, TOC-NET, Tru-Link, and LVIS. We are fully
capable of creating interfaces for a host of special applications, and
radio models offered by Thales
Communications, Inc., Harris RF Communications, ITT, Motorola, Kenwood, Icom,
Vertex, M/A Com, Maxon, Yeasu, Bendix King/Relm, Tait, Standard, EF Johnson and
other radio manufacturers. We are known for our value-added
manufacturing and customization services. Our facility us fully
capable of supporting well over 300 different radio models and
interfaces. Again, custom products and solutions are part of what we
do at Tactical Command Industries, Inc. daily.
Tactical
Command Industries, Inc. was founded by tactical professionals and is
owned and operated by a retired Police Sergeant possessing years of
tactical experience. Our technical services and engineering staff has an extensive array of
experience in applicable fields. These unique characteristics have
allowed us to develop headset products for practically any application.
Special configurations or requirements are well within our skill set! Call
or email us today to discuss your needs, request a product for
evaluation or to get your order started!! |
EMAIL TCI'S CUSTOM WORKS DIVISION |
HEADSET EVALUATION PROGRAM: We thank you for your interest in our solution and are happy to state that we do offer a headset test and evaluation (T&E) program for members of law enforcement, government and the military.
Our government (local, state, federal and military) Evaluation Program Coordinator is Patricia Medine, Telephone (603) 418-8705 To qualify for the program, the requesting party must be authorized to request a product evaluation on behalf of the organization and our Headset Evaluation Request Form has been submitted. We provide the Headset Evaluation Request Form in two formats: ONLINE FORM or DOWNLOADABLE PDF FORM. It should be noted that our evaluation program is intended to provide products for evaluation WHEN "officially sanctioned by your agency or organization". Typically, realistic training events or controlled scenario-based training usually provide a good representation of product function and capabilities. It has been our experience that these sessions are well suited for product evaluation for anything from tactical boots to communication products. It is not recommended to ever deploy in real-world situations with any unfamiliar tactical equipment, so this should be avoided.
DOD RESTRICTIONS: Now in affect as a result of product evaluation requests that have resulted in theft or embezzlement of equipment... DOD has indicated that product evaluations by its members are only sanctioned when endorsed by a ranking official or contracting office approval. This is especially related to evaluation requests received from organizations outside the jurisdiction of the continental U.S. or Hawaii. It is quite unfortunate that the problem has resulted in the following restrictions, but we certainly understand the legitimate need to evaluate our products prior to purchasing is crucial. Nonetheless, we cannot disregard DOD policies or recommendations. As a result, TCI must reserve the right to decline evaluation requests or offer special concessions when an evaluation request would normally be declined based upon geographical location or circumstances. Organizations deployed, please take note of the following.
An evaluating agency is required to perform the evaluation within the United States of America or U.S. Territories. Prior written permission must be obtained prior to transporting an evaluation headset outside of the U.S.A.
Special terms and conditions apply regarding TCI product evaluations taking place outside of the United States of America or U.S. Territories pursuant to DOD policies. CONTACT TCI FOR FURTHER INFORMATION.
An evaluating agency of foreign origin will be required to provide a separate document and payment information in the event the evaluation headset is not returned within a specified period of time. The evaluating agency will only be billed if the evaluation terms and conditions are violated.
| SELECT YOUR REQUEST PREFERENCE: | STEP #1 | STEP #2 | STEP #3 |
Download and complete the MS Word®
or
 request
form |
Download the form by clicking on the link
to the left and complete the form (
or
MS Word®).
Print the completed form and have a
ranking or supervisory officer sign it. Then fax the signed form to
TCI. |
Evaluate the headset for up to 30 days and then return the product with feedback on agency letterhead or complete the evaluation feedback form supplied with the headset. | |
| OR | |||
| Complete and submit online request form | You will received an automated message by email indicating your request has been received. Please print the automated email response and have a ranking or supervisory officer to sign and date the automated response. Then fax the signed automated response to TCI | Evaluate the headset for up to 30 days and then return the product with feedback on agency letterhead or complete the evaluation feedback form supplied with the headset. | |
| Customers without fax capability: Complete the ONLINE EVALUATION REQUEST FORM form and then send us an email stating the name of the ranking or supervisory officer approving the evaluation request and indicate you do not have fax capability. | |||
UPDATED - 04/07/2009 19:19 HRS. EST BY TACTICAL COMMAND INDUSTRIES INCORPORATED - ALL RIGHTS RESERVED WORLDWIDE....