700TT/CCAP-Tech Lighting End Cap For Tech Trak - $11.20
All sections of track are shipped with the required end cap on each end of the track. Order separately for each open end of the track if cutting and separating track sections. Available in satin nickel. Please see product specification sheet for complete product options and details.
Qnty:
Finish Colors
Satin Nickel
700TT/CFXH-Tech Lighting Flexible Connector For Tech Trak - Starting at $84.02
This connector joins sections of track together end to end at desired sharp horizontal angle, available conductive or isolating, in satin nickel. Order two additional rigid standoffs without connector to support tracks near corner. Please see product specification sheet for complete product options and details.
Qnty:
Finish Colors
Satin Nickel
Special Instructions
700TT/S-Tech Lighting Rigid Standoff Without Connector For Tech Trak - Starting at $42.01
The field-cuttable rigid standoff without connector is used in the center of each 8' track section and at each end of the run. For especially curvy runs, order additional standoffs without connector to support peaks of curves and heavy elements, as required. Available in satin nickel, and in heights of 2", 6", 12", 24", 36" 48" and 96" tall. Please see product specification sheet for complete product options and details.
Qnty:
Finish Colors
Satin Nickel
Special Instructions
700TT/SCC-Tech Lighting Rigid Standoff With Conductive Connector For Tech Trak - Starting at $70.02
The field-cuttable conductive rigid standoff with connector is used to join sections of track together, supplying continuous current end to end while supporting the system. Order one for each connection point between track sections. Available in satin nickel, and in heights of 2", 6", 12", 24", 36" 48" and 96" tall. Please see product specification sheet for complete product options and details.
Qnty:
Finish Colors
Satin Nickel
Special Instructions
700TT/SIC-Tech Lighting Rigid Standoff With Isolating Connector For Tech Trak - Starting at $79.34
The field-cuttable isolating rigid standoff with connector is used to join sections of track together, isolating current from each track for long runs with multiple feeds while supporting the system. Order one for each connection point between track sections. Available in satin nickel, and in heights of 2", 6", 12", 24", 36" 48" and 96" tall. Please see product specification sheet for complete product options and details.
Qnty:
Finish Colors
Satin Nickel
Special Instructions
Lighting Forum can be contacted by telephone at 1-(888) 628-5332 or FAX (516) 599-7680 for further information.
Need a quality Tech Lighting product not listed on this site? Contact us via telephone, the feedback form found on the main page, or by email to questions@lightingforum.com for more information.